Drywall Removal and Replacement
We cut out saturated drywall to the flood line, dry the cavity, and install new drywall with matched texture and paint. This includes ceilings where water traveled down from an upper-floor leak or roof intrusion.
From soggy drywall to a finished room you can use again
Reconstruction and Repairs After Water Damage Ocean Springs MS Done Right
When the water is gone, the real work starts. Reconstruction and Repairs After Water Damage Ocean Springs MS means putting your home or business back together - new drywall, flooring, trim, paint, and the structural fixes behind the walls. We handle post-water damage reconstruction in Ocean Springs for homeowners in Gulf Hills, East Beach, and across Jackson County, and we work directly with your insurance adjuster so the rebuild matches the damage report.
Careful work. Honest options.
About this service
What Reconstruction and Repairs After Water Damage Ocean Springs MS Involves
Reconstruction and Repairs After Water Damage Ocean Springs MS is the rebuild phase that follows drying and cleanup - the carpentry, drywall, flooring, insulation, trim, and finish work that turns a damaged structure back into a livable space. After a burst pipe, slab leak, or roof leak, the drying crew pulls the moisture out. Then we step in: we replace saturated drywall, rehang baseboards, lay new flooring, patch and paint, and rebuild anything the water compromised behind the walls. We verify moisture content with a hygrometer before we close a single wall.
Ocean Springs homes deal with a specific set of water problems. Storm surge flooding off the Gulf, crawl space moisture that never fully dries, and 60-year-old copper piping that finally gives out. When a water heater leak or appliance overflow soaks a hallway, the damage rarely stops at the surface. That is why post-water damage reconstruction Ocean Springs homeowners call us for starts with a full moisture map - using a thermal imaging camera and moisture mapping sensors - so we rebuild what is actually wet, not just what looks wet.
- ✓ Insurance-Ready Documentation
- ✓ Mold Handled Before Rebuild
- ✓ Code-Correct Structural Repairs
- ✓ One Crew, Start to Finish
What's included
What Is Included in Your Water Damage Rebuild
Our reconstruction scope covers the structural and finish work needed to return your property to pre-loss condition after a covered water event. Drying, extraction, and mold remediation are separate services we also provide, and we sequence them so nothing gets rebuilt on a wet or contaminated surface.
Flooring Replacement
Carpet padding gets pulled and replaced. Hardwood gets evaluated for drying or replacement. Tile, vinyl, and laminate that lifted or warped are removed and reinstalled. We match existing materials where possible so the repair blends in.
Structural and Framing Repairs
Water weakens subfloor, joists, and sometimes load-bearing framing. We replace compromised members, sister damaged joists, and bring the repair up to current Mississippi code, including vapor barrier and insulation work in crawl spaces.
Trim, Baseboards, and Doors
Baseboards, door casings, and sometimes doors absorb water and swell. We remove and replace affected trim, rehang doors, and repaint to match. This is the finish work that makes a rebuilt room look original again.
Plumbing and Electrical Repairs
If the water came from a failed supply line or a slab leak, the source gets repaired before rebuild. Outlets, switches, and wiring affected by water are inspected and replaced as needed to meet code.
Final Paint and Finish
Every rebuilt surface gets primed and painted to match the existing color. We do a final walkthrough with you to confirm the finish, check moisture readings one more time, and hand over the warranty on our workmanship.
How it works
How Our Rebuild Process Works
We walk the property with a moisture meter, thermal imaging camera, and hygrometer, then map every wet zone. You get photos, readings, and a written scope. Most assessments take 60 to 90 minutes, and we can usually schedule within 24 hours of your call.
We build the rebuild estimate in Xactimate and send it to your adjuster. You see line items for drywall, insulation, flooring, trim, and paint - not a lump sum. If your carrier approves a partial scope, we tell you exactly what is covered and what the difference is.
We remove saturated drywall, carpet padding, and damaged baseboards, then confirm the structure is dry before rebuild begins. If any framing still reads high on the meter, we bring in air movers and a dehumidifier and wait. We do not build on wet wood.
New drywall goes up, seams get taped and floated, texture is matched to the existing walls, and paint is color-matched. Flooring, baseboards, trim, and any plumbing or electrical rough-in affected by the water are replaced. A typical room takes 5 to 10 working days.
We walk the job with you room by room, check every repaired surface, and confirm moisture readings are back to normal. You get a warranty on our workmanship and a final photo set for your records and your insurance file.
STEP 01Damage Assessment
We walk the property with a moisture meter, thermal imaging camera, and hygrometer, then map every wet zone. You get photos, readings, and a written scope. Most assessments take 60 to 90 minutes, and we can usually schedule within 24 hours of your call.
Tools & methods
Tools and Methods We Use on Every Rebuild
Thermal Imaging Camera (FLIR)
Finds temperature differences that reveal hidden moisture behind walls, under floors, and in ceilings. We use it before, during, and after rebuild to confirm no wet zones were missed.
Moisture Meter and Hygrometer
Measures moisture content in drywall, framing, and subfloor. We log readings daily and do not close a wall until readings return to normal for the material type.
Bore Scope
Lets us see inside wall cavities without full demo. We use it to check for hidden mold growth, wet insulation, and damaged framing before deciding what comes out.
Dehumidifier and Air Mover (Dri-Eaz, Phoenix, B-Air)
Pulls moisture out of the air and moves it off wet surfaces. We size the equipment to the cubic footage of the affected area and monitor with a hygrometer until dry.
Water Extraction Unit and Sump Pump
Removes standing water fast after a burst pipe, appliance overflow, or storm intrusion. Truck-mounted units handle large volumes; portable sump pumps work in crawl spaces and basements.
Xactimate Estimating Software
Builds the rebuild scope in the same format most insurance carriers use. That alignment speeds up adjuster review and reduces the chance of a denied supplement.
Real results
Before and after.
Reconstruction and Repairs After Water Damage
Kitchen Rebuild After Supply Line Failure
A supply line under the kitchen sink burst overnight and flooded the cabinet base, flooring, and part of the hallway. The subfloor read high on the moisture meter, and the cabinet base had swelled beyond repair.
After: We extracted standing water, removed the damaged cabinet base and flooring, dried the subfloor to normal readings, and rebuilt with new cabinet base, luxury vinyl plank flooring, baseboards, and matched paint. The kitchen was back in use in nine days.
Book this service →
Reconstruction and Repairs After Water Damage
Lower Level Rebuild After Storm Surge
Storm surge pushed 8 inches of water into the lower level of a home near Front Beach. Drywall, insulation, and flooring below the flood line were saturated with contaminated water and had to come out.
After: We removed all affected materials, sanitized the framing with antimicrobial spray, dried the space, and rebuilt with moisture-resistant drywall, new insulation, and tile flooring. The lower level was fully restored in five weeks.
Book this service →
Reconstruction and Repairs After Water Damage
Bedroom Rebuild After Attic Water Heater Leak
A water heater in the attic failed and sent water down through the ceiling into two bedrooms. Ceiling drywall was sagging, insulation was soaked, and water had traveled into the wall cavities behind the headboards.
After: We replaced the water heater, cut out and dried the affected ceiling and wall cavities, then rebuilt with new drywall, insulation, texture, and paint in both rooms. Moisture readings returned to normal, and the job was done in eight days.
Book this service → Problems we solve
Problems We Solve With Post-Water Damage Reconstruction in Ocean Springs
Water damage leaves behind more than wet carpet. These are the problems we see most often in Ocean Springs homes, and how we fix them so they do not come back.
Ask a pro →Hidden moisture behind walls that looks dry on the surface
We use a thermal imaging camera and moisture mapping sensors to find water that has traveled behind walls, under floors, and into ceilings. We cut out and dry every affected cavity before rebuilding, then verify with a hygrometer before closing anything up.
Mold growth starting within 48 hours of a water loss
We check every cavity with a bore scope before rebuild. If mold is present, we treat with antimicrobial spray and remediate before installing new materials. Our IICRC AMRT-trained technicians follow the IICRC S520 standard for mold work.
Insurance scope that misses hidden damage
We document everything with photos and meter readings before we start, and we file supplements in Xactimate as hidden damage is found. Our scope format matches what carriers expect, which speeds up approval and reduces disputes.
Crawl space moisture that keeps coming back
We dry the crawl space, replace damaged vapor barrier and insulation, and repair compromised joists. We also check for foundation water intrusion and sump pump issues so the source gets addressed, not just the symptom.
Transparent pricing
What Reconstruction After Water Damage Costs
$2,500 - $40,000+ depending on scope
Pricing for reconstruction and repairs after water damage in Ocean Springs depends on how much square footage was affected, what materials need replacing, and whether structural framing was compromised. In 2026, most single-room rebuilds in this area run $2,500 to $9,000, while whole-home rebuilds after major flooding can exceed $40,000. If your loss is covered, your insurance payout typically funds most or all of the work. We provide a line-item estimate in Xactimate before any work starts, so you see exactly what each part of the rebuild costs.
A proper rebuild protects the value of your home and prevents a repeat loss. Rebuilding over wet framing or skipping mold treatment costs far more later. Our estimates are line-item, insurance-aligned, and warrantied, so you know what you are paying for.
•affects cost
The more area water reached, the more drywall, flooring, insulation, and paint the rebuild requires. A single room is a much smaller scope than a whole floor. We measure affected areas during assessment and price by the square foot.
Get a quote ↗•affects cost
Category 1 water (clean supply line) allows some materials to be dried and saved. Category 3 water (sewage backup or storm surge) requires full removal of porous materials below the flood line, which increases both labor and material cost.
Get a quote ↗•affects cost
If framing, subfloor, or load-bearing members were compromised, the rebuild includes carpentry and possibly engineering. That adds cost but is required to bring the repair up to Mississippi code.
Get a quote ↗•affects cost
Standard drywall and vinyl plank cost less than hardwood, tile, or custom cabinetry. If you upgrade materials during the rebuild, the difference is typically out of pocket unless your policy includes replacement cost coverage.
Get a quote ↗ Proof you can check
Licensed, Certified, and Documented
- IICRC WRT (Water Restoration Technician) · Institute of Inspection, Cleaning and Restoration Certification
- IICRC ASD (Applied Structural Drying) · Institute of Inspection, Cleaning and Restoration Certification
- IICRC AMRT (Applied Microbial Remediation Technician) · Institute of Inspection, Cleaning and Restoration Certification
- EPA Lead-Safe Certification · U.S. Environmental Protection Agency
- Mississippi State Board of Contractors License · Mississippi State Board of Contractors
Customer reviews
What Ocean Springs Homeowners Say
★★★★★
“A pipe burst behind our kitchen wall in January and soaked half the room. The crew mapped the moisture, showed me the readings, and rebuilt the drywall, cabinets, and floor. They handled the insurance paperwork directly with our adjuster. Whole job took nine days, and the kitchen looks better than it did before the leak.”
MT
Marcus T.Homeowner, Gulf Hills
✓ Verified“
★★★★★
“After the storm surge came through, our downstairs was wrecked. They dried everything first, then rebuilt the floors, baseboards, and lower drywall. What stood out was the daily updates - I always knew what was happening and when. They also caught mold starting behind one wall and treated it before closing it up.”
DR
Danielle R.Homeowner, East Beach
✓ Verified★★★★★
“Water heater let go on a Friday night and flooded the hallway and two bedrooms. They were out Saturday morning, extracted the water, and had the rebuild scoped by Monday. New flooring, new baseboards, fresh paint. Insurance covered it, and the estimate matched what the adjuster approved. No surprises on the bill.”
RP
Raymond P.Property Owner, St. Martin
✓ VerifiedMost single-room rebuilds in Ocean Springs run $2,500 to $9,000 in 2026, and whole-home rebuilds after major flooding can exceed $40,000. Cost depends on square footage affected, whether flooring and cabinetry need replacing, and how much structural framing was compromised. If your loss is covered, your insurance payout typically funds most or all of the rebuild. We provide a line-item estimate before any work starts.
A single room usually takes 5 to 10 working days once the structure is dry. A whole-home rebuild after storm surge flooding can run 6 to 12 weeks. The biggest variable is drying time - if framing still reads high on a moisture meter, we wait before closing walls. We give you a written schedule at the start and update you if anything shifts.
Yes, in most cases. Standard homeowners policies cover sudden and accidental water damage - burst pipe, appliance overflow, water heater leak - including the rebuild. Flood damage from storm surge usually requires a separate flood policy. We work directly with your adjuster, submit our scope in Xactimate, and document hidden damage so supplements get approved.
Yes. We handle full home rebuild after water damage Ocean Springs MS projects, from structural framing and subfloor replacement through drywall, flooring, trim, paint, and final finishes. We are licensed through the Mississippi State Board of Contractors, insured, and we warranty our workmanship. If your home needs a complete rebuild, we can phase it so you get back into part of the house sooner.
Ready when you are
Get Your Reconstruction and Repairs After Water Damage Ocean Springs MS Started
We assess the damage, document it for your insurance, and rebuild it right. Licensed through the Mississippi State Board of Contractors, insured, and warrantied. Call us and we will schedule your assessment - usually within 24 hours.
Schedule My Rebuild (228) 279-0515 →
Request an appointment
Contact Our Ocean Springs Team
Call us at (228) 279-0515 any time, day or night. We answer live and dispatch immediately for emergency water damage. For non-emergency questions or to schedule an inspection, email us or stop by our office in Ocean Springs. We serve all of Jackson County.
Call anytime(228) 279-0515Email the officeinfo@waterdamagerestorationoceansprings.com
Office hoursOpen 24 hours · 7 days a week