Moisture Inspection and Mapping
We use a moisture meter, thermal imaging camera, and bore scope to find every wet spot inside the wall and ceiling cavity. You get a clear picture of the damage before any cutting starts.
Fast drying, clean cuts, and a smooth finish that lasts.
Drywall Water Damage Repair Ocean Springs MS
Drywall Water Damage Repair Ocean Springs MS starts with stopping the water and ends with a wall you can paint. Our team handles burst pipes, roof leaks, and appliance overflows across Jackson County. If your ceiling is sagging or your baseboards are stained, we map the moisture, dry the cavity, and replace only what is ruined. Call (228) 279-0515 for same-day help.
Careful work. Honest options.
About this service
What Drywall Water Damage Repair Ocean Springs MS Involves
Drywall Water Damage Repair Ocean Springs MS is the process of finding trapped moisture inside walls and ceilings, drying the structure, and restoring the gypsum board so it looks and performs like new. Water wicks upward through paper facing and turns drywall into mush faster than most homeowners expect. We use a moisture meter and thermal imaging camera to trace the wet zone, then decide whether the board can be dried in place or needs a clean cut and replacement.
Ocean Springs homes deal with humidity most of the year, and that slows drying more than people realize. A slab leak or water heater leak in a 39564 ranch house can soak the bottom two feet of drywall before you ever see a puddle. We pull baseboards, check the vapor barrier, and run dehumidifiers until the hygrometer reads dry. If you have been searching for water damaged drywall repair Ocean Springs MS, we handle the whole job from extraction to paint-ready finish.
- ✓ Stop Hidden Mold Growth
- ✓ Save More of the Wall
- ✓ Protect Floors and Cabinets
- ✓ Get a Paint-Ready Finish
What's included
What Our Drywall Repair Includes
Every drywall water damage repair job includes the core steps needed to dry the structure and restore the wall. Add-ons like mold remediation or flooring repair are quoted separately if the damage extends beyond the drywall.
Water Extraction and Drying
Standing water is removed with extraction units and sump pumps. Then dehumidifiers and air movers run until the drywall and framing hit normal moisture content, usually in three to five days.
Cut-Out and Disposal
Drywall that cannot be saved is cut out in clean lines. We remove wet insulation, haul away debris, and treat the exposed framing with antimicrobial spray before closing it back up.
New Drywall Installation
We hang new drywall to match the existing thickness, tape the seams, and apply multiple coats of joint compound. The repair is built to blend into the surrounding wall.
Texture Matching and Paint Prep
We match your existing texture, whether it is orange peel, knockdown, or smooth. The finished surface is ready for primer and paint, so your painter can step in without extra prep.
Insurance Documentation
Photos, moisture readings, and Xactimate line items are provided for your claim. We can communicate directly with your adjuster to keep the process moving.
How it works
Our Drywall Water Damage Repair Process
You call (228) 279-0515 and describe what you see. We ask about the source, the room, and how long it has been wet. A crew rolls out with extraction gear and drying equipment. Most Ocean Springs addresses see us on site the same day, and we work 24/7 for active leaks.
We run a moisture meter, hygrometer, and thermal imaging camera across the wall and ceiling. A bore scope lets us look inside the cavity without tearing everything open. You get a clear picture of how far the water traveled and which sections of drywall are salvageable.
Standing water comes out first with a water extraction unit and sump pump. Then we set Dri-Eaz and Phoenix Restoration Equipment dehumidifiers and B-Air air movers. Drying typically takes three to five days, and we check readings daily until the drywall hits normal moisture content.
Drywall that crumbles or reads wet after drying gets cut out in clean rectangles. We remove wet insulation, treat the framing with antimicrobial spray, and install new board. Taping, mudding, and texture matching follow, usually within a day or two of the cut-out.
We take final moisture readings, show you the numbers, and walk the room with you. If the job ties to an insurance claim, we provide Xactimate documentation and photos. You get a finished wall and a record of what was done.
STEP 01Emergency Call-Out
You call (228) 279-0515 and describe what you see. We ask about the source, the room, and how long it has been wet. A crew rolls out with extraction gear and drying equipment. Most Ocean Springs addresses see us on site the same day, and we work 24/7 for active leaks.
Tools & methods
Tools and Methods We Use
Moisture Meter and Hygrometer
These measure moisture content in drywall, framing, and air. We use them to decide whether drywall can be saved or has to be replaced.
Thermal Imaging Camera (FLIR)
Infrared imaging shows temperature differences that reveal hidden moisture behind walls. It lets us find the wet zone without tearing out drywall to look.
Dri-Eaz and Phoenix Dehumidifiers
These pull moisture out of the air and the wall cavity. They run continuously until the drywall reads dry on our meters.
B-Air Air Movers
High-velocity air movers speed evaporation from wet drywall surfaces. We position them to create a vortex that dries the wall evenly.
Bore Scope
A small camera that goes inside the wall cavity through a tiny hole. It lets us see mold, wet insulation, or damaged framing without a full cut-out.
Water Extraction Unit and Sump Pump
These remove standing water before drying starts. Fast extraction limits how far moisture wicks into the drywall.
Real results
Before and after.
Drywall Water Damage Repair
Ceiling Leak in East Beach Cottage
A roof leak soaked a 4x6 foot section of ceiling drywall. The paper was peeling, the paint was bubbling, and a moisture meter read 28 percent. The homeowner was worried the whole ceiling would need to come down.
After: We dried the ceiling cavity for four days, cut out the damaged section, and installed new drywall. Texture was matched to the existing finish. Final moisture reading was 11 percent, and the repair is invisible.
Book this service →
Drywall Water Damage Repair
Burst Pipe in Gulf Hills Ranch Home
A supply line burst behind the washing machine and soaked the wall and baseboards. The drywall was soft to the touch, and water had wicked up about 18 inches. The homeowner called us within a few hours.
After: We extracted the standing water, ran dehumidifiers and air movers for three days, then cut out the lower 24 inches of drywall. New board, tape, and texture were done in one day. The wall is paint-ready.
Book this service →
Drywall Water Damage Repair
Water Heater Leak in St. Martin Rental
A failed water heater soaked the shared wall between the garage and a bedroom. The drywall was stained and soft, and the tenant reported a musty smell. The property manager needed it fixed fast.
After: We dried the wall cavity, treated the framing with antimicrobial spray, and replaced the damaged drywall. The water heater was replaced at the same time. The unit was back to normal in five days.
Book this service → Problems we solve
Problems We Solve With Drywall Repair
Wet drywall causes more problems than a stained wall. Here are the issues we see most often in Ocean Springs and how we fix them.
Ask a pro →Sagging ceiling from a roof leak
We locate the leak, dry the ceiling cavity, and replace the sagging section. We also coordinate roof repair so the problem does not return with the next storm.
Stained, soft drywall behind a water heater
We pull the baseboards, dry the wall cavity, and replace the damaged drywall. We also check the floor and subfloor for hidden moisture before we close it up.
Bubbling paint from a slab leak
We trace the slab leak, dry the wall, and repair the drywall once the source is fixed. Our thermal imaging camera finds the wet zone without tearing out the whole wall.
Moldy drywall after a slow appliance overflow
We test for mold, remediate if needed, and replace the affected drywall. Antimicrobial spray and proper drying keep the problem from coming back.
Transparent pricing
Drywall Water Damage Repair Cost
$350 - $1,800 depending on scope
Pricing for drywall water damage repair in Ocean Springs depends on how much drywall is affected, whether drying equipment is needed, and how much of the wall has to be replaced. Most jobs fall between $350 and $1,800. Small ceiling patches are on the low end, while full-room cut-outs with insulation replacement and texture matching land on the higher end. We provide a clear estimate before work starts, and we document everything for insurance so you know what is covered. Typical 2026 pricing in this area reflects equipment costs and material pricing.
Fixing wet drywall early saves money. A small repair now prevents mold remediation, flooring replacement, and structural repairs later. We give you a clear number before we start, and we document everything for your insurance claim.
•affects cost
The more drywall that is wet, the more drying equipment and replacement material the job requires. A single wall section costs less than a full room.
Get a quote ↗•affects cost
If drywall can be dried in place, the cost is lower. If it has to be cut out and replaced, material and labor costs go up.
Get a quote ↗•affects cost
Wet insulation has to come out and be replaced. That adds material cost and a little extra labor to the job.
Get a quote ↗•affects cost
Smooth walls are simple to patch. Orange peel, knockdown, and custom textures take more time and skill to match.
Get a quote ↗ Proof you can check
Licensed, Certified, and Local
- IICRC WRT (Water Restoration Technician) · Institute of Inspection, Cleaning and Restoration Certification
- IICRC ASD (Applied Structural Drying) · Institute of Inspection, Cleaning and Restoration Certification
- EPA Lead-Safe Certification · U.S. Environmental Protection Agency
- Mississippi State Board of Contractors License · Mississippi State Board of Contractors
- Xactimate Certified · Xactware
Customer reviews
What Ocean Springs Homeowners Say
★★★★★
“A supply line burst under the sink and soaked the wall behind it. The crew was out the same afternoon, mapped the moisture, and set up drying equipment. Four days later they cut out the bad section and had new drywall up. You cannot tell where the repair was. Fair price and no runaround.”
MT
Marcus T.Homeowner, Gulf Hills
✓ Verified“
★★★★★
“After a roof leak, our ceiling was sagging and stained. I was worried the whole ceiling would have to come down. They dried what they could, replaced only the damaged section, and matched the texture perfectly. They also documented everything for our insurance claim. Highly recommend.”
DR
Denise R.Homeowner, East Beach
✓ Verified★★★★★
“We had a water heater leak in a rental that soaked the drywall in two rooms. The team handled the drying, the cut-out, and the rebuild, and kept us updated the whole time. Tenants were back to normal in under a week. We use them for all our properties now.”
RP
Raymond P.Property Manager, St. Martin
✓ VerifiedMost drywall water damage repair jobs in Ocean Springs MS run $350 to $1,800, depending on square footage and whether drying equipment is needed. A small ceiling patch might be $350 to $600. A full room with cut-out, insulation replacement, and texture match can reach $1,800. Insurance often covers the bulk of it when the damage comes from a sudden leak.
Yes, if you catch it early. Drywall that is still firm and has been wet less than 48 hours can often be dried in place with dehumidifiers and air movers. Once the paper facing crumbles or mold is visible, that section has to come out. We test with a moisture meter and give you a straight answer before we cut anything.
Most walls dry in three to five days with professional equipment. Ocean Springs humidity can push that to five or six days if the cavity is deep or insulation is soaked. We check readings daily and do not pull equipment until the drywall reads normal moisture content. Rushing it leads to mold and paint failure.
Sudden events like burst pipes, appliance failures, and storm-driven roof leaks are usually covered. Long-term seepage and neglected maintenance typically are not. We document everything with photos, moisture readings, and Xactimate estimates so your adjuster has what they need. We can also speak directly with your carrier to move the claim along.
Ready when you are
Need Drywall Water Damage Repair Ocean Springs MS?
We are licensed, insured, and available 24/7 for active leaks. One call gets a crew moving with moisture meters, dehumidifiers, and everything needed to dry and repair your drywall. Call (228) 279-0515 now.
Get Same-Day Help (228) 279-0515 →
Request an appointment
Contact Our Ocean Springs Team
Call us at (228) 279-0515 any time, day or night. We answer live and dispatch immediately for emergency water damage. For non-emergency questions or to schedule an inspection, email us or stop by our office in Ocean Springs. We serve all of Jackson County.
Call anytime(228) 279-0515Email the officeinfo@waterdamagerestorationoceansprings.com
Office hoursOpen 24 hours · 7 days a week